lantaobags.com
Bag Prototyping Revision Log & Tech Pack Checklist
One printable working document: the engineering brief fields, the tech pack document set, the revision log columns with severity rules, and the golden sample sign-off list. Built from the same process we run on the LantaoBags sample-room floor.
1Engineering brief — lock these before sampling
- Exact job, user, frequency and climate stress
- Target dimensions, capacity and max load
- Carry method and access behaviour under load
- Measurable pass / partial pass / fail criteria
- Must-have features vs nice-to-have details
- Unit-cost target and launch date
- Approval owner and sign-off authority
- Reference sample or marked-up competitor photos
2Tech pack document set
1Design Brief
- Use case, silhouette, key features
- Target user and channel
2BOM Sheet
- Every fabric, trim, hardware and pack
- Supplier, spec and stock / custom status
3Material & Color Reference
- Swatch references and Pantone targets
- Finish, hand-feel and backing notes
4Hardware Spec Sheet
- Zipper type, slider and tape width
- Pull, ring, buckle and finish approval
5Construction Callouts
- Stitch type, SPI and reinforcement map
- Seam allowance and panel overlap per piece
6Measurement & Tolerance
- Key measurements at ±5 mm
- Stitch and hardware tolerances
7Branding, Packaging & QC
- Logo placement, artwork and packaging
- QC test plan and inspection gates
8Revision Log & Sign-Off
- Numbered revision log
- Golden sample sign-off sheet
3Test gates to define in the tech pack
| Check | Target to agree | Why it matters |
| Handle / strap anchor | Load to failure, then retest | Reveals weak reinforcement and stitch pattern |
| Zipper cycle | 500 open / close cycles | Exposes drag, misalignment and slider wear |
| Seam and tolerance | ±5 mm on key measurements | Stops dimension drift between rounds and bulk |
| Hardware corrosion | Salt-spray check | Flags finish failures before they reach the customer |
| Loaded carry | Target capacity, 30-minute carry | Shows foam collapse, strap dig and silhouette loss |
4Revision log — one row per defect
| # | Issue | Photo ref | Probable cause | Corrective action | Severity | Owner / due |
| 1 | Strap anchor tears at load | IMG-01 | Single stitch row, no backer | Add PVC backer, X-box stitch | Critical | |
| 2 | Base panel 6 mm oversize | IMG-02 | Seam allowance not stated | Lock seam allowance in tech pack | Major | |
| 3 | Zipper twists at corner | IMG-03 | Four-layer seam stack | Thin binding, revise gusset | Major | |
| 4 | Edge-paint gloss uneven | IMG-04 | Surface prep skipped | Add prep step and drying time | Minor | |
| 5 | | | | | | |
| 6 | | | | | | |
| 7 | | | | | | |
| 8 | | | | | | |
Severity rule: Critical = structural failure (tear-out, zipper blowout); Major = fit, dimension or function drift; Minor = cosmetic. Change one variable per defect category per round.
5Golden sample sign-off
- Physical sample signed and tagged
- Final measurement sheet approved
- Tech pack version frozen
- BOM, materials and colors locked
- Swatches and hardware approvals attached
- QC checkpoints and watch-outs listed
- Sample-fee credit and MOQ confirmed
- Production lead time and owner recorded