LantaoBags lantaobags.com

Leather Goods Sourcing & Test Checklist

One printable page: the type picker, the specs to lock for all 7 leather goods types, the tests to run before bulk, and the material rules. Compiled from over 500 production runs on the LantaoBags factory floor.

1Match the type to the channel

TypeBest channelSpec to lockFailure to avoid
Structured briefcaseExecutive & heritageFirm full-grain or top-grain; vegetable-tanned front panelsPanel sags more than 0.5 in in a 48-hour hang test
Soft-milled toteEveryday retail & giftingChrome-tanned top-grain, 1.2–1.4 mmStrap anchor tears through soft grain under load
Leather backpackPremium daily carry1.2 mm body, 2.0 mm base & strap zonesUndersized rivet pulls through within 500 cycles
Duffel / weekenderTravel & giftingFirm top-grain or full-grain; solid brass hardwareZinc-plated clip snaps around 35 lb
Wallets / small goodsAccessory & catalog setsTop-grain; edges skived to ~0.4 mmThick edges crack the edge paint after 30 flexes
Cosmetic cases / pouchesGift & line extensionSmooth stain-resistant shell; waterproof liningRaw cotton lining wicks oils within 14 hours
Hybrid / specialtyCorporate & sport-adjacentTop-grain on handles only; synthetic on heavy panelsFull-leather base adds weight and soaks up dew

2Lock these specs for the 7 types

1Structured briefcase
2Soft-milled tote
3Leather backpack
4Duffel / weekender
5Wallets & card holders
6Cosmetic cases & pouches
7Hybrid / specialty

3Tests before bulk

4Material rules before you approve

5Quote, sample & QC gates